FAQs

Innovative is here to address any concerns you may have. Below are frequently asked questions; if your concerns aren’t addressed below, please reach out to our customer service team by calling 800-524-2744, emailing customerservice@innovativeworkspaces.com or web chat.

  1. You must attach the monitor to the arm, and you must place the arm in the mount, prior to attempting adjustments.
  2. Press the arm down to approximately parallel with the desk prior to turning the strength adjustment screw. This relieves pressure on the gas cylinder and makes it easier to adjust.
  3. If the arm is too strong, turn the adjustment screw clockwise. If the arm is too weak, turn the adjustment screw counter-clockwise. Depending on the weight of your monitor, you may have to make 15-20 turns. After each few turns, stop to check to see if the monitor remains in place when you remove your hand from it.
  4. If you follow these steps and are still unable to get the arm to float, or if you reach a point where you can no longer turn the screw, it is possible that your monitor is outside of the weight range of your mounting arm. Please contact Innovative customer support at 800-524-2744 for assistance or watch the video.

Please visit our contact page to reach out to Innovative’s international subsidiaries.

The FLEXmount offers six different options for mounting or reconfiguring your monitor arm.

500x488xfaq.500x0-is-pid26606.png.pagespeed.ic.-Fc237AuA6

Using a citrus-based solution will help to remove some of adhesive from the puck, then you should be able to pry the Tablik puck off of the tablet.

You can adjust the tension of the tilter by using the hex key that was included with your monitor arm. By using the hex key at the bottom of the tilter, you can tighten or loosen the tension based on your needs.

VESA-compliant monitors follow an industry-standard mounting system. There will be a 75mm (about 3″) or 100mm (about 4″) square screw hole pattern on the back of your monitor. If you do not see one, remove the base from the monitor (see your monitor’s User’s Guide for instructions on how to do this).

Generally, the average lead time for our monitor mounts is 3-5 business days. All of Innovative’s products are made to order, allowing for customizable options to meet the needs of customer applications. Lead times for individual products depend on available materials and order quantities.

Most of Innovative’s products are designed and assembled in the US.  Most products are shipped from our Easton, PA headquarters.

Monitor arms sold after 2010 come with a 10 year warranty. Winston Workstation® includes a 5 year warranty, Tablik® includes a 3 year warranty, and Busby® and the Bild® electric height adjust column are covered with a 1 year warranty. You can visit our warranty page for more information.

Innovative strives to provide the best product possible through our quality standards and award winning design. Our products are tested to 30,000 cycles, far exceeding BIFMA industry standards. You can learn more about Innovative’s commitment to quality here.

To reduce environmental impact, Innovative is fully compliant with Restriction of Hazardous Substances Directive (RoHS), WEEE Directive 2002/96/EC and the EU Directive on Packaging and Packaging Waste (94/62/EC). To learn more about Innovative’s environmental ethics, click here.

You are welcome to purchase directly from Innovative by calling 800-524-2744, or sending an email to orders@innovativeworkspaces.com. Innovative’s monitor mounting solutions are also available through various re-sellers and dealers.

For orders placed by phone, Innovative can accept credit cards or credit terms to qualifying customers.

To apply for credit, please contact Innovative’s sales team at 800-524-2744.

Innovative will assess sales tax on orders shipping to Pennsylvania addresses unless you have a tax-exempt certificate, in which case no sales tax will be assessed.

Innovative is a GSA Contract Holder. GSA Contract #: GS-28F-011GA.
Please visit our Government page for more information.

Our normal business hours are 9 a.m. – 5 p.m. EST Monday-Friday. During non-business hours, you can email to customerservice@innovativeworkspaces.com or send a message in web chat and your inquiry will be responded to the next business day.

All returns must be labeled with a valid Return Authorization (R/A) number on the outside of packaging. Shipments without R/A numbers will be rejected. R/A numbers may be obtained by calling 800-524-2744.

a. RESTOCKING FEES — Standard Items totaling value of $1,000 or less will incur no restocking fee if returned in resalable condition and within 30 days of original shipment. After 30 days of original shipment and with prior approval, a restocking fee of up to 25% will be applied. Standard Items totaling value of more than $1,000 may be returned if in resalable condition and within 30 days of original shipment, and will be subject to a restocking fee of up to 25%.

b. DEFECTIVE ITEMS — Defective items may be returned within limits of the Warranty.

c. CUSTOM-CONFIGURED ITEMS — Non-defective Custom-configured Items are not returnable.

Innovative’s Schedule B number is 8473.305100.

Innovative does not participate in NAFTA. Our products are classified in subheading 8473.30, which is covered by the Information Technology Agreement and puts the duty rate at zero for participating countries (Canada and Mexico). Since the duty rate should be zero, there is no reason to issue a NAFTA certificate.

Talk to us today about your next project.   INQUIRE NOW >